Pump Skid 1

Remote plate heat exchanger cooling skid with HT and LT heat exchangers to cool the engine circuits with isolation valves expansion tanks fuel oil cooler and water circulation pump with a small connection box. These systems tend to be used when the generator is in standby in the basement and there isn’t enough room or air flow for a radiator or the Radiator is remote from the Genset over 18 metres away. As the static head of fluid is too much for the Egine genset to cope with so we can design a cooling system to directly cool the Genset with plate heat exchangers and use a remote flatbed cooler to cool the plate heat exchangers. This model covers MTU Genset 12V4000, 16V4000, 20V4000 600Kw – 1500Kw .Two circuit or single circuit Diesel and Gas engines. Generator cooling skid at a water treatment plant.